.webp)
.webp)
Opening up a home is
Knocking down a wall is easy. Knowing which walls can come down without the house moving is the hard part.
The single most common renovation request we get is "can we knock that wall down and open this up." Sometimes yes. Sometimes yes, but only with a steel beam through the ceiling. Sometimes absolutely not — that wall is doing more structural work than the front of the house.
We engage a structural engineer at the consultation phase, not after demolition. We tell you exactly which walls can go, what beam size is needed, how the load gets back to the footings, and what the ceiling integration looks like. Then we build it so the finished room flows like the wall was never there.
Our Premium Services.
Structural feasibility first.
Engineer at the consultation phase. Beam sizes specified. Load paths traced. Footing checks done. You know what's possible before the quote is finalised.
Beams sized and installed properly.
Steel or laminated timber beams sized to the load. Temporary propping where needed. Ceiling integration so the new opening looks like the wall was never there.
Kitchen and living redesigned together.
New combined room redesigned as one space. Kitchen layout, sightlines, lighting and storage all reconfigured to suit the new openness — not stitched together.
Finishes flow across the opening.
Floor levels matched. Ceiling lines flowing. Cornice and skirting profiles continued through the opening. The room flows like it was always one space.
How we open homes up properly.
Assess & Engineer
Structural assessment with an engineer, beam sizing, footing check, ceiling integration plan. All done before demolition.
Open & Brace
Demolition, structural steel install, temporary propping where needed. Safety-first sequence.
Integrate & Finish
Floor levels matched, ceiling lines flowing, lighting redesigned for the new space. Looks like it was always one room.
.webp)
.webp)
Why our open plan renovations don't fail
Knocking down a wall is easy. Knowing which walls can come down without the house moving is the hard part.
Open plan renovations across Sydney get pitched as design jobs by builders who haven't actually worked out the structural side. We've been called in to several renovations partway through where the builder removed a wall without proper engineering, the ceiling started sagging, and the homeowner was suddenly facing emergency propping plus a structural redo. None of that needed to happen.
Our approach to open plan renovations is structural-first. The engineer comes to the consultation. Footings get checked. Load paths get traced. Beam sizes get specified before the quote. Then the demolition and the finishing run cleanly because the hard work was done upfront. Every open plan renovation we deliver across Sydney runs this way.